How To Access Ip Camera From Internet

How to view your IP camera remotely via a spider web browser

User Awarding Requirement

Updated 07-20-2021 08:23:48 AM 1841892

This Article Applies to:

Notation: The steps below assume you already have your IP camera installed and connected to a router with Cyberspace access. HTTP://192.168.1.101 represents the IP address of the camera being accessed.

Stride one

Find your camera's IP address. If you don't know its IP accost, click here.

Step two

Open up a web browser and blazon the IP address. Enter your login information.

Step 3

Get to SETTING > BASIC > Network > Information to notice the HTTP port number used past the camera. The default is 80.

Usually at that place is no need to alter the port number. Withal some ISPs block port fourscore, so yous may need to change the port number accordingly. In the image below, we changed it to 3333.

Step iv

After you change the port, you volition need to reboot the camera in order to save the changes. Yous can do that past going to SETTING > BASIC > Organisation > Initialize and clicking Reboot.

Step 5

After you reboot, log back into the photographic camera on your web browser, using
http://(IP accost):(Photographic camera port number).

For this case, the address would be http://192.168.1.101:3333.

Subsequently this, you lot'll need to adapt the port forwarding settings on your router. The configuration depends on the router model. Consult your router's technical support accordingly. For this instance, we are using a TP-Link TL-WR941ND.

Step i

Log into your router'due south management page (http://www.tp-link.u.s./faq-87.html).
Go to Forwarding > Virtual Servers and click Add New.

Step two

Type the IP address and the port used past the photographic camera in the corresponding field. For the Protocol, we recommend you lot select ALL. Click Save to add this new entry.

Step 3

Port 3333 tin can now exist used by the photographic camera.

Step four

Go to Status folio to check the WAN IP accost of the router.

Stride 5

On a different PC (one that's not connected to the same network equally your camera), you can view your photographic camera by opening the web browser, typing http://(IP accost):(Camera port number) and pressing Enter.

For this example, the accost would exist http://183.38.vii.205:3333.